Product Overview
As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on the length of tubing or elevation, with higher flow closer to the water source.
The spray reaches up to a 3.0 ft. radius at 30 PSI; Discharge water from 0 to 13 GPH at 0-30 PSI.
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
Adjustable Flow Bubbler Assembly is preassembled and ready to install-insert the stake in the ground. Connect the attached 1/4 in. tubing to larger size supply tubing with the Clamp N Pierce Connector; Periodically check for damage and replace
Adjustable flow bubbler, 1/4 in. Clamp N Pierce inlet and six in. stake come preassembled for a quicker install; the Stream spray bubbler releases water in a half-circle pattern.
Patented Clamp N Pierce Connector punches a hole into supply tubing and attaches 1/4 in. tubing inlet.
Adjustable flow bubbler and 1/4 in. tubing made of polyethylene treated with UV inhibitors to prevent fading and cracking; Stake and Clamp N Pierce Connector are made of ABS treated with UV inhibitors to prevent fading and cracking.
It comes with one Adjustable Flow Bubbler Assembly, including a bubbler, six in. stakes, and 1/4 in. Clamp N Pierce inlet; Use with 1/4 in., 1/2 in., 5/8 in., or 0.710 in. Supply Tubing to transport water to plants
Raindrip stands by its product and guarantees a 1-year, 100% satisfaction. Raindrip will send you a new product for free if your product breaks; pay for shipping and handling.
